{{message}}
X

5 Common Stairlift Myths Answered

June 11, 2019

stairlift myths

Myth #1: Stair lifts are installed to the wall and require a contractor.

It is a common misconception that when a stair lift is installed, it will be attached to the wall. Instead, the stairlift is mounted onto the stair treads with the track running the length of the staircase.

This eliminates the need for any construction work. Sometimes, a small adaptation must be made, such as trimming a windowsill to avoid a collision with the seat is required, but even in these cases, the modifications are very minor and/or noticeable.

Myth #2: A stair lift will stop working when there is a power outage.

Contrary to popular belief, stair lifts are not hardwired into your home, but instead are DC battery powered and simply plug into your wall to be recharged. They store a reservoir of power in their batteries so in the event of a power failure, they will be able to move up and down the staircase because they draw on the power stored in their batteries.

These batteries typically store enough power for multiple trips up and downs stairs: the exact number of trips will depend on the type (straight vs. curved) and length of your staircase as well as the amperage of the batteries. The batteries recharge when the stairlift is left on a park point. Some stairlifts will charge wherever they are left on their track. This feature is called ‘Continuous Charge’.

freecurve curved stairlift safety sensors handicareMyth #3: A stair lift won’t stop if an obstruction occurs.

While it is unlikely that you will ever encounter an obstruction while using a stairlift, if you do hit something while riding your stairlift, your Handicare stairlift is embedded with safety sensors so that it will immediately activate an emergency stop. This will prevent the stairlift from moving in the direction of travel until the obstruction is removed.

These features are called ‘Safety Edges’. Once a safety edge is activated, the stairlift can only be driven in the opposite direction of the obstruction to enable its removal.

Myth #4: Batteries in D/C powered stairlifts go dead and regularly need replacing.

DC powered stair lifts commonly contain two highly durable, heavy duty rechargeable batteries which power the stair lift up and down the staircase. As aforementioned, when the stair lift isn’t in use, the batteries will be charged when plugged in if the stair lift is left on a charge point along the track.

stairlift joystick 2Myth #5: Stair lifts will start moving on their own.

When a stairlift is not in use, it cannot move anywhere unless operated by a person controlling the toggle or remote control. While a person does not need to be physically seated on the stairlift for it to move (which is great if you want to use the lift to move some laundry up and down the stairs!), the stairlift can be operated by handheld controls, which will call and send a stairlift between floors or to a park point to charge while not in use.

Hopefully now you see how easy it is to add a stairlift to your home (and how beneficial)!

Want to learn more? Speak to one of our mobility experts today! Call 888-637-8155 or request a callback.

winter fall prevention

Fall Prevention Tips During Winter

Ice, Ice Baby Sledding, ice skating, skiing… there are a lot of wonderful things about winter. But unfortunately, when snow falls, so do people. According to the US Center for Disease Control, 2.8 million seniors are treated annually for injuries related to falling. That equates to roughly one out of every three adults age 65...

Read More
aging in place

Aging in Place Safely

Today, 10,000 Americans will turn 65. Tomorrow, another 10,000 will turn 65. And the day following, another. As the Baby Boomer generation ages, we will see a shift in the aging population. In 2011, just 13% of Americans were over the age of 65; by the year 2030, all Baby Boomers will be over the...

Read More
handicare stairlifts history

Handicare: 130 Years in the Making

Handicare was founded in 1986, but built on 130 years of experience. In 1886, based on the instinct of a young Dutch businessman, Jan Hamer. Hamer took his schooling seriously: expanding his knowledge, refining his techniques and learning 3 languages: Dutch, English and German. Intrigued by technology and industry worldwide, he used what he had...

Read More